Italian plug, two poles + earth
CEI 23.16 S. 11 10 A/250 V
CEI 23.16 S. 17 16 A/250 V
| VALID IN THIS COUNTRIES |
|---|
 |
Rubber leads:
black (other colours on request)
| APPROVAL SYMBOLS | ||||||
|---|---|---|---|---|---|---|
| ||||||
| LEADTYPES IN USE AND CROSS-SECTIONS IN
MM² |
||||
|---|---|---|---|---|
| H03VV-F | 3 G 0,75 | |||
| H05VV-F | 3 G 0,75 | 3 G 1,0 | 3 G 1,5 | 3 G 2,5 |
| H05RR-F | 3 G 0,75 | 3 G 1,0 | 3 G 1,5 | |
| H05RN-F | 3 G 0,75 | 3 G 1,0 | ||
| H05RN-F | 3 G 1,0 | 3 G 1,5 | ||
| H05RN-F | 3 G 0,75 | 3 G 1,0 | ||
| CONFIGURATIONS |
|---|
 |
The
earthed Italian plugs/power outlets are available in two versions, for
10 A and for 16 A. The difference between them is the diameter of the
contacts and the distance between contacts. The plugs can be inserted
in any direction and are thus not polarized. The Italian plug system is
standard in Libya, Ethiopia and Chile. Sometimes one can see the system
also in North Africa.
The Italian plug has three pins arranged in a row. The earthing pin is in the center. The two contact pins are partly insulated.
The plug for 10 A/250 V has 4 mm pins and the contact pins have a center-to-center distance of 19 mm between each other.
The plug for 16 A/250 V has 5 mm pins and the contact pins have a center-to-center distance of 26 mm between each other.
The Italian plug has three pins arranged in a row. The earthing pin is in the center. The two contact pins are partly insulated.
The plug for 10 A/250 V has 4 mm pins and the contact pins have a center-to-center distance of 19 mm between each other.
The plug for 16 A/250 V has 5 mm pins and the contact pins have a center-to-center distance of 26 mm between each other.